Priyavrat.Thareja

Blog » Pages » COMPETITIVE PRODUCT DEVELOPMENT: Seminar, 29th Sept 2009

COMPETITIVE PRODUCT DEVELOPMENT: Seminar, 29th Sept 2009.Pages

COMPETITIVE PRODUCT DEVELOPMENT: Seminar Programme at Chandigarh, 29th Sept 2009
Brief Plan of 29th Sept
Venue: Auditorium PEC

Registration 9 to 9.15 am

INAUGURAL SESSION 9.30 am (to be in seats by 9.15)
Welcome address, 9.30-35
Introduction to Seminar 9.35 -45
Lighting of lamp 9.45- 9.55
Address by Director PEC 9.55- 10.15
Address by Guest of Honour: Er Chandra Mohan, Padam Shree 10.15- 10.35
(Introduction to chief guest: Mr V P Saha WFO Chair- Energy )10.35 - 10.40
Address by Chief guest: Er G K Pillai, CMD, HEC Limited Ranchi 10.35- 11.00
Vote of Thanks 11.00-11.05

HIGH TEA11.05-11.35

PLENARY TALKS SESSION

Prof Y P Kathuria, Prof Electronics Engg Aiichi Inst of Tech, Japan 11.45-
Er Deabashish Sarkar to 1.30 pm (http://www.sixsigmaiq.com/Columnbio.cfm?externalid=15)
Mr SP Sharma MD, Creativity, Creativity in Product Development 1.30 to 1.50 pm

LUNCH

TECHNICAL SEESION I –- Product Development Issues 2.30–4.20 pm

Key Note Lectures
Mr Sanjiv Singh : Director Gilard Electronics, Advanced Product Quality Planning -A Case Study 2.30-2.50

Wg Cmdr H.S Anand:Mg dir Quality Growth Professional Competence through Systems 2.55-3.15

Er Chakshu Kalra, Director: Development & Consolidation of rights 3.20 to 3.40
3.40 to 4. 00
Contributed Technical Papers ( 5- 7 minutes each)

TECHNICAL SEESION II — Product Development Technologies 4.25–5.55 pm

Key Note Lectures
Mr P J Singh, Director Tynor : 4.30-4.50
Mr B S Sangha, GM IAPT: Ceative Product Development -A Case Study 4.55-4.15
Mr. Ashutosh Sharma Director Summit Engg : Liders Product development Journey through Summit
Mr Robin Bagchi: Director NISST, Low cost Micro Alloyed Rolled Products

Contributed Technical Papers of Session ( 5- 7 minutes each)
Some titles include*:
1. Simulation of Guns : Col J. Jain
2. Simulation in Manufacturing ( Castings) : Mr Harpal Singh

VALEDICTORY SESSION 6.0 - 6 30 Chief Guest Dr Satish Kumar, Director TBRL; Guest of Honour Er Harbhajan Singh, Ind. Advisor, Punjab
Panel Memebers: Er V P saha, Prof Y P Kathuria, Er D Sarkar, Er B S Sangha, , Mr B S Anand (MIA), Mr Pravin C Shah, PPDC (Agra)

In all 18 contributed papers have been accepted so far.
Registration Fee for Delegates Rs 1000/-
draft in favour Director PEC, Chandigarh

Subject: Re: COMPETITIVE PRODUCT DEVELOPMENT: Seminar at Chandigarh, 29th Sept 2009
at PEC Univ of Tech AUDITORIUM ( Please be seated by 9.15 am)

PEC University of Technology

Sector 12, Chandigarh , INDIA

The Success of an Engineer is marked by his /her competencies over a thorough ‘Product development’ with a promise to enhance the holistic Quality of life. The net improvement is defined by ‘gains@user’ minus costs which are borne by the society. Truly, Engineering profession were marked to serve as a win-win game, where there is no big loser, not even the environment, mother earth etc. The user is however the next door repairer, because an efficient engineer would have done it first time right- the designing, the production and the packaging of ideas, the needs and the complexities of a required product.

Complexities do not deter the engineer. They rather enthuse the engineer with an innovative zest, to outperform the available knowledge, and that competence may be displayed through exemplary product performance. The engineer however, has the onus to hone up his/her skills to be able to build that product @ lowest overall cost, and excel in terms of effectiveness and efficiency, undeterred by manufacturing limitations- For s/he has a continual wherewithal to evolve new manufacturing technologies.

Towards this objective it is planned to organize brainstorming over competitive product development strategies over a conference on Sept 29th 2009. The exact programme would follow.

Some experts have already consented to participate. Namely Prof Y P Kathuria, Visiting Professor Aichi Institute of Technology, Yakusa, Toyota , Japan will render on his work allied to Rapid Prototyping, net-shaping etc.

Others who have consented include Er Vijay Prakash Saha, WFO Chair- Energy,

Mr Debashish Sarkar, Head Operational Excellence ICICI Group, and author of several books ( Punblished by American Society of Quality), MD of HEC Ranchi etc.

You are kindly requested to kindly contribute a paper, which shall be published.

The papers may be on some of the following topics, but not limited to these areas:

1. ‘Complexities made simple’ in Competitive Product development

2. New manufacturing innovations

3. ‘Complexities made simple’ in Advanced Manufacturing

4. Process Control and Management in Competitive Product development

5. Efficiency and Effectiveness Paradigm in Holistic Product Design.

6. Advanced Product Quality Planning / Control

7. Simulation softwares in Competitive Product development

8. Metrics & Process Regulation in Manufacturing process

9. Standardisation

10. Use of Six Sigma & TQM in Manufacturing/ Product development

11. Lean systems in Product development

Contacts:

Prof P Thareja

Head Metallurgical Engineering Deptt.,

PEC University of Technology

Sector 12, Chandigarh , INDIA

E Mail: prof.pthareja@gmail.com

Tel 91-172-2753951, 2753952

Fax 91-172-2745175

Organised By PEC University of Technology

Supported by The Institute of Indian Foundrymen, Terminal Ballistic Research Lab

The Mohali Industrial association, Mohali, Chandigarh

# 701, PEC University of Technology (Formerly Punjab Engineering College),
Chandigarh 160 012,
Tel 0172 - 2744101, 2753701
mobile 9815396006

- Posted on September 25th, 2009 in Pages | 4,014 Views |

No Comments »

No comments yet.

Leave a comment

You must be logged in to post a comment.